top of page

POLIFLUID

polifluid001.jpg
A patented system for powder coating: visibly better finishing with powder reaching the most difficult areas. Among the many advantages of the Polifluid system is colour uniformity and savings of coating materials allowing end users to powder coat with excellent results, without the need to make expensive modifications or replacement of existing coating equipment.

Benefits of Using POLIFLUID.

permeation.jpg

POLIFLUID® concentrates the nitrogen contained in compressed air through the principle of elective permeation and uses it as a fluid carrier during all stages of powder application. The temperature control of the fluid carrier and the positive or negative ionization further enhance the inherent performance advantages of the system.

hot-and-cold-thermometer-hotcold-257x300-1.jpg

POLIFLUID® produces inert, anhydrous and clean fluid carrier and enables constant humidity and temperature: two previously uncontrolled variables. The application conditions can therefore be controlled and consistent all day long and through all seasons.

colorful-paint-splashes-colored-powder-explosion-mix-rainbow-splash-on-transparent-backgro

POLIFLUID® guarantees a significant increase of transfer efficiency and higher performance,
expressed in m²/kg of powder used. The Return on Investment (ROI) has been calculated to be from 6 to 8 months on average.

powder-coating-gun-1024x683.jpg

POLIFLUID® is installed between the air compressor and the powder coating application point. It doesn’t replace users’ existing equipment but operates with it, feeding:

  • Electro-static application.

  • Tribo static application.

  • Fluidizer bed.

How does POLIFLUID fit in to your line.

layout.png
On a Reciprocator Line.

Simply put the POLIFLUID® unit in the line so it feeds the guns and the hopper and watch the quality and savings automatically increase.

What size POLIFLUID do you need?

Designed to be used with no more than one powder coating gun.
  • N² Production – 10Nm³

​​

  • Compressed Air Inlet Pressure – 8.5Bar/G

​​

  • Ionization +/- 0

​​

  • Faraday Cage effect Reduction

MicroPolifluid.png
Mini-Polifluid.jpg
Designed to be used with 1 or 2 powder coating guns.
  • N² Production – 20Nm³

​

  • Compressed Air Inlet Pressure – 8.5Bar/G

​

  • Ionization +/- 0

​

  • Faraday Cage effect Reduction

​

Designed to be used with between 2 and 30 powder coating guns in various sizes depending on requirement.
polifluid001.jpg
bottom of page